Performance Arm

  • PCA Series Plastic Control Arm, Adjuster

    PCA4, PCA5, PCA6, PCA7, PCA8, PCA8, PCA10, PCA12, PCA14, PCA16
    Thread Range: 10-32 to 1 1/4-12
    Housing Material: Nylon+30% GF
    One Side: CF ROD ENDS; Another Side: SCOM Shperical Plain Bearing

  • PCX Series Plastic Control Arm, Adjuster

    PCX4, PCX5, PCX6, PCX7, PCX8, PCX8, PCX10, PCX12, PCX14, PCX16
    Thread Range: 10-32 to 1 1/4-12
    Housing Material: Nylon+30% GF
    Insert: Shperical Plain Bearing

  • PCL Series Plastic Control Arm, Adjuster

    PCL4, PCL5, PCL6, PCL7, PCL8, PCL8, PCL10, PCL12, PCL14, PCL16
    Thread Range: 10-32 to 1 1/4-12
    Housing Material: Nylon+30% GF
    Insert: SCOM Shperical Plain Bearing

  • Set of 8 Johnny Joint Control Arms for Jeep JK Wrangler

    This is our complete set of all 8 Johnny Joint® adjustable length control arms
    for the '07 & up Jeep JK Wrangler. All arms feature heavy tubular steel construction
    and Johnny Joint® rod ends on both ends.

  • TJ/LJ Rear Lower Johnny Joint Control Arms

    The arms are fully adjustable so that you are able to adjust your pinion angle after a lift is installed.
    The arms are fabricated out of 1 1/4" heavy wall D.O.M. tubing and feature the Johnny Joint®
    on both ends of the arms.

  • Rear Upper Control Arms from JK Off Road Suspension Systems

    Arms are fabricated from 1.25" o.d. x .188" wall d.o.m. steel tubing,
    feature the 2 1/2" rod end on one end, and the 1" RH thread forged 2 1/2" and jam nut 
    Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

  • Adjustable Lower Control Arms for Jeep Wrangler TJ, Cherokee XJ

    Crown Automotive Adjustable Lower Control Arms for Jeep® 84-06 Wrangler TJ, Cherokee XJ

×

© Copyright 2014 Farox Bearing, All Rights Reserved